PEGOLAND GEL S1 is a specialized adhesive with a gel texture, which offers maximum performance in terms of workability and safety during installation. It is a low-dust product that, thanks to its special composition, allows for greater product performance compared to similar adhesives. Suitable for installing low-absorption pieces such as porcelain tiles on floors and walls in indoor and outdoor environments or in conditions that require flexibility. According to NTC 6050-1, it is a cementitious adhesive (C) with improved characteristics (2), vertical slip resistance (T), deformable (S1), extended open time (E), high tensile adhesive strength after heat aging (H2) and high tensile adhesive strength after immersion in water (I2).
Features and applications Ready to use. Only requires the recommended addition of water. Low dust emissions during preparation. Higher performance per m2 Avoid double gluing on pieces with formats smaller than 60 cm x 60 cm. Facilitates fast and clean installations. Develops high adhesion on different substrates. Suitable for indoor and outdoor use. Moderate traffic. Meets the requirements established in TECHNICAL STANDARD NTC 6050-1.
Technical data Dry properties Appearance Fine, homogeneous powder Color Gray and white Dust density (g/cm3) 1.2 ± 0.1 Properties in humidity (23+2°C, 50+5% RH) Water dosage for the mixture 7.0 ± 0.5 liters for every 25 kg of product Rest time 5 minutes Open Time (minutes) – Working time 45 to 60 minutes* Pasta life (hours) – Waste time ~ 6 Grouting time Minimum 24 hours Light traffic Approx. 24 hours Commissioning > 7 days Application temperature 5°C to 35°C Application thickness 3 to 10 mm pH approx. 11 Wet density (g/cm3)1.5 ± 0.1 Final properties under NTC 6050-1 Tensile bond strength standard condition after 28 days (MPa) ≥ 1.0 Tensile adhesive strength after immersion in water (MPa) ≥ 1.0 Tensile adhesive strength after heat aging (MPa) ≥ 1.0 Tensile adhesive strength condition Open time (MPa) ≥ 0.5 Tensile bond strength condition Extended open time (MPa) ≥ 0.5 Transverse deformation (mm) ≥ 2.5 and < 5.0 Slip resistance ≤ 0.5 mm Environmental information Maximum Calculated VOC (g/l) < 0.2 g/l
Performance according to coating format
Format (cm) Trowel (mm) Yield (kg/m2) 40 x 40 6 x 6 / 6 x 10 4.5 kg/m2 80 x 80 12 x 12 / 15 x 15 9 kg/m2 100 x 100 15 x 15 11 kg/m2 ≥ 120 x 100 15 x 15 ≥ 15 kg/m2
